Foto's
Lamm Industries
klik hier om naar de
site van de fabrikant te gaan
‘Musical instruments with a touch of that special something that makes the music come alive’
LAMM designs zijn véél meer dan een combinatie van circuits, metalen behuizingen en trial-and-error experimenten. Ze zijn de meest onwaarschijnlijke combinatie van zuivere wetenschap en de fijnste muzikale instrumenten met een vleugje van dat speciale 'iets' dat muziek tot leven brengt in het proces van de reproductie en het tegelijkertijd bevrijdt van de beperkingen van de electronica. Een typische Lamm klant is iemand die alle cirkels van "Dante's hel" doorkruist heeft in zijn zoektocht naar een mirakel en die alleen maar de muzikale waarheid wil vinden. Met de apparatuur van Lamm is hij eindelijk thuis gekomen en is zijn queeste naar mirakels voorgoed voorbij.
Contacteer ons voor alle informatie omtrent Lamm versterkers
M 1.2 REFERENCE
MONAURAL POWER AMPLIFIER
Pure Class A hybrid amplifier producing 110 Watts into 8 AND 4 Ohms, 400 Watts into 2 Ohms, 600 Watts into 1 Ohm (continuous). Features hybrid vacuum tube/sold-state design with one specially selected 6922 vacuum triode. 12 high speed MOS-FET output transistors, no overall feedback. Switch-selectable bias/voltage settings for 8- or 4-Ohm operation. XLR and RCA inputs; 2 pairs of binding posts. Remote control: power on/off.
M 2.2
MONAURAL POWER AMPLIFIER
Highly biased class A/AB hybrid amplifier producing 220 Watts into 8 AND 4 Ohms (41 Watts pure class A operation), 700 Watts into 2 Ohms, 900 Watts into 1 Ohm (continuous). Features hybrid vacuum tube/sold-state design with one specially selected 6922 vacuum triode. 12 high speed MOS-FET output transistors, no overall feedback. Switch-selectable bias/voltage settings for 8- or 4-Ohm operation. XLR and RCA inputs; 2 pairs of binding posts. Remote control: power on/off.
ML 1.1
MONAURAL POWER AMPLIFIER
Push-pull tube amplifier producing 90 Watts continuous into 8/4/2 Ohms. Highly biased class A/AB operation. High current low impedance output triodes (6C33C-B/6C33C). The idle current and balance of the output stage can be precisely adjusted and measured using two analog meters and a set of special multi-turn trimming potentiometers. XLR and RCA input connectors.
ML 2.1
MONAURAL POWER AMPLIFIER
Single-ended tube amplifier producing 18 Watts continuous into 16/8/4 Ohms. Pure class A operation. Regulated power supply. High current low impedance output triodes (6C33C) in the output stage and in voltage regulator. XLR and RCA input connectors. Multi-turn trimming potentiometers for setting the nominal value of plate voltage and plate current of the output tube.
Full description Detailed specifications
ML 3
MONAURAL POWER AMPLIFIER
Single-ended tube amplifier with a separate power supply producing 32 Watts continuous into 16/8/4 Ohms. Pure class A operation, no overall feedback. Utilizes a very powerful direct-heated triode GM-70 (125W plate dissipation). Employs one of the most sophisticated power supplies that have ever been used in building of any audio device. XLR and RCA input connectors. Multi-turn trimming potentiometer for setting the nominal value of plate current of the output tube.
L 2 REFERENCE
LINESTAGE PREAMPLIFIER
Line-level dual-mono hybrid preamp with a separate power supply; tube rectifier, choke contained filter, vacuum tube regulator; TKD stepped potentiometers for volume control -- the best available on today's market; built-in remote on/off for LAMM AUDIO LABORATORY® amplifiers.
LL 2
LINESTAGE PREAMPLIFIER
Line level vacuum tube preamplifier with 3 inputs, 1 tape loop, 2 sets of single- ended outputs. Class A design, audibly neutral power supply featuring a full-wave VACUUM rectifier with a choke-containing filter, and one solid-state low-voltage analogue non-switching regulator used as the heater supply. Available in standard and deluxe versions.
LP 2
PHONO PREAMPLIFIER
Dual monaural pure vacuum tube phono preamplifier with 2 separate inputs for MM and MC cartridges, selector/gain switch. All amplification stages utilize legendary high transconductance Western Electric 417A/5842 vacuum tubes. Single-ended pure class A high current design. No loop feedback is employed. Utilizes a very accurate passive RIAA EQ network. Audibly neutral power supply features a full-wave VACUUM rectifier with a choke-containing filter (two chokes are employed), and one solid-state low-voltage analogue non-switching regulator used as the heater supply. Available in standard and deluxe versions.